249/800CAF1D/W33 Split spherical roller bearings

C:31.85 kN; T max.:200 °C; H3:105; A2:42.7 mm; L:160 mm; Dz:95 mm; Designation of closed end cover:SCCE209; N:16mm; B1:43.7 mm; A4:26 mm;

L:68 mm; d1:37.4 mm; Designation of housing:FL205N-; B:21.4 mm; Dz:60 mm; s1:24.2 mm; e:16 mm; A2:39.4 mm; A:27 mm; A1:13 mm;

Base to Center Height:Not Applicable; Shaft Attachment (2):Set Screw; Brand:Baldor-Dodge; Anti-Rotation Pin:Yes; Bearing Insert Material:Steel; Manufacturing Plant Location:Rogersville, TN; Bearing Bore Shape:Round; Ring Size:Standard; Retainer Type:Std Retainer; Ball Bearing Housing Series:211 Seri

Dimension D Max:11.25 in; Pre Install Clearance Min:0.0024 in; Dimension L:4.47 in; Grease Lubrication - B/C/O Seal:1000 rpm; Dimension F:13.63 in; e - Geometry Factor:0.23; Oil Lubrication - B/C/O Seal:1000 rpm; Oil Lubrication - T Seal:2400 rpm; Oil Lubrication - M/N Seal:1400 rpm; Pre Install Cle

K - Factor8:1.74; db - Cone Backface Backing Diameter:2.83 in; d:2.2500 in; a - Effective Center Location4:-0.28 in; C0 - Static Radial Rating:37200 lbf; R - Cone Backface To Clear Radius3:0.14 in; C1 - Dynamic Radial Rating (1 million revolutions)6:36100 lbf; C90 - Dynamic Radial Rating (90 million

Recommended tightening torque for set screw:11.5 Nm; T max.:100 °C; B1:48.3 mm; B:36.4 mm; Weight:1.31 kg; d:30 mm; s1:34.1 mm; A2:28 mm; N1:16 mm; H2:56 mm;

G:M10x1; Weight:11.05 kg; s1:53.6 mm; T min.:-20 °C; Designation of bearing:EX217-52G2; S:23.4 mm; L1:162 mm; B1:73.2 mm; d:82.55 mm; d1:119 mm;

Vibration Sensor Indicator:No; Bearing Insert Material:Steel; Housing Type:Short Series Plain; Liner Bore Type:STANDARD BORE TYPE; Brand:Baldor-Dodge; UPC:782476610142; Housing Coating:Powder Coat; Liner Bore Size:2.9375 in; Pillow Block:SHORT SER PL-WATER C; Ship Weight:102 LB;

N2:49 mm; s1:24.6 mm; A:49 mm; S:19 mm; L2:16 mm; Designation of housing:T209N-; Recommended tightening torque for set screw:8 Nm; Weight:2.34 kg; A1:16 mm; L1:87 mm;

C0:15.2 kN; T min.:-20 °C; H:95 mm; G:M6x1; L:167 mm; B1:38.9 mm; A:60 mm; Weight:2.2 kg; C:25.7 kN; s1:30.2 mm;

Designation of open end cover:SCO210-50; A2:42.6 mm; s1:25.8 mm; C:35.1 kN; A:40 mm; e:10 mm; C0:23.2 kN; d:50 mm; T min.:-20 °C; Recommended tightening torque for set screw:22 Nm;

Design Units:METRIC; do - Ball Diameter:13.493750 mm; Da - Outer Ring Backing Diameter:116.5 mm; da - Inner Ring Backing Diameter:88.500 mm; Contact Angle:25 º; Limiting Speed (Oil):18600 rpm; Bearing Weight:0.859 Kg; Ball Type:STEEL; r - Outer Ring To Clear Radius3:1.0 mm; Full Timken Part Number:3

G:R1/8"; B:34 mm; Designation of housing:EHE208-; S:9 mm; T max.:200 °C; L1:85 mm; A:36 mm; C0:19.9 kN; Recommended tightening torque for set screw:8 Nm; A5:25 mm;

Y1:2.91; Y0:2.84; Associated sleeve reference:H313; Characteristic inner ring frequency, BPFI:8.76 Hz; Fatigue limit load, Cu:28.6 kN; e:0.23; Min operating temperature, Tmin:-40 °C; Characteristic cage frequency, FTF:0.42 Hz; Dynamic load, C:236 kN; d2:85.8 mm;

Recommended tightening torque for set screw:8 Nm; B:30.2 mm; T min.:-20 °C; A1:13 mm; d:49.21 mm; N:18mm; Weight:2.53 kg; A2:60.7 mm; J:111 mm; s1:33.4 mm;